wyo vishay draloric www.vishay.com document number 22202 44 revision 14-may-03 for technical questions, contact slcap@vishay .com impedance (z) as a function of frequency (f) at t a = 20 c (average). measurement with lead length 6mm. ceramic ac capacitors class x1, 440v ac / class y2, 250v ac all approval marks are also shown on the label. design: disc capacitors with epoxy coating rated voltage u r : (x1): 440v ac , 50hz (iec 60384-14.2) (y2): 250v ac , 50hz (iec 60384-14.2) 250v ac , 60hz (ul1414, csa c22.2) dielectric strength between leads: component test: 2200v ac , 50hz, 2s as repeated test admissible only once with 2000v ac , 50hz, 2s random sampling test (destructive test): 1500v ac , 50hz, 60s dielectric strength of body insulation: 2000v ac , 50hz, 60s (destructive test) dissipation factor tan : 25 ?10 -3 insulation resistance r is: 6 ?10 9 ? category temperature range ? a : (- 40 to + 125) c climatic category acc. to en60068-1: 40/125/21 coating: epoxy, dipped, insulating, flame retarding acc. to ul 94v-0 taping and special lead configurations: on request marking: d 9mm d 10mm 440 ~ x1 wyo 2n2 m 250 ~ y2 440 ~ x1 wyo 4n7 m iec 384-14/2 250 ~ y2 0.6 0.05 f 1 l = 30 -3 d max. 3 max. v 0.5 s max. ?dimensions in mm 10 2 10 1 10 0 10 -1 10 -2 0.1 1 10 100 f [mhz] z [ ? ] 12 nf 1 nf 2.5 nf 5 nf i~ [ a] 0 50 100 150 200 250 u r [v~] i = f (u r ) (typ.) 10 nf 5 nf 3.3 nf 2.2 nf 1.0 nf 500 400 300 200 100 0
wyo vishay draloric document number 22202 www.vishay.com revision 14-may-03 45 for technical questions, contact slcap@vishay .com ceramic ac capacitors class x1, 440v ac / class y2, 250v ac capacitance d x s max. f 1* d 0.05* v 0.5* ordering ceramic (pf) (mm) (mm) (mm) (mm) code dielectric 1000 6.5 x 4.5 wyo102 cm k 1500 8.0 x 4.5 wyo152 cm k 1800 8.0 x 4.5 5 1.4 wyo182 cm k 2200 9.0 x 4.5 wyo222 cm k 2500 9.0 x 4.5 wyo252 cm k 3300 10.0 x 4.5 0.6 wyo332 cm k k 4000 4700 12.0 x 4.5 wyo472 cm k 5000 12.0 x 4.5 7.5 wyo502 cm k 6800 17.0 x 4.5 wyo682 cm k 8200 17.0 x 4.5 1.6 wyo822 cm k 0.010 f 21.0 x 4.5 wyo103 cm k 0.012 f 21.0 x 4.5 wyo123 cm k capacitance tolerances: 20% ordering information wyo series 103 cap. value m tolerance cm rated voltage cf0 lead configuration k internal code *standard lead configuration, other lead spacing and diameter available on request. ordering code : 7th digit: capacitance tolerance: 20% = m 10th/11th/12th digit: lead configuration (see general information) approvals iec 60384-14 2 nd edition (1993) (y2) cb-test certificate fi 585 a 1 (250v ac ) table ii & a 1 (1995-06) (x1) cb-test certificate fi 508 a 2 (440v ac ) en 132400 (1994) these approvals together with the cb-test certificate (y2) cb-test certificate de 1-8789 (250v ac ) substitutes the national approval of the nations (x1) cb-test certificate de 1-8789 (440v ac ) given in the table below line-by-pass & ul 1414 antenna coupling capacitor e 183844 v1 s2 (250v ac ) across-the-line, csa c22.2 no. 1-m1981 line-to-ground and lr 64546-10 (250v ac ) antenna isolation capacitor this approval mark together with the cb-certificate replace all national approval marks of the following countries (they have already signed the cb-agreement): austria belgium denmark finland sweden france germany ireland italy switzerland netherlands israel portugal spain great britain japan norway china poland czech. republic singapore rep. of korea hungary iceland slovenia
|